Click to Send SMS/Email

Products We Offer :

Home »  Our Products »  Electrical Cable Accessories » Cable Terminal Ends » Copper Compression Lugs - Short Barrel

Copper Compression Lugs - Short Barrel

HEX' range of cable terminate ends have teen designed to meet international standards. This ensures compliance with the demands of a majority of end user's lite tee Electrical Authorities, Contractors, Switch Board Panel Builders, Electrical Wholesale Outlets and Traders.

Copper specification: 99% IACS, to BS 601 7 1981 (1989).
Copper finish: Electro Tinned to BS 18721984 (1984)
The compliance with electrical specification are in accordance with the general requirement's. Initial/Final Resistance, Tensile “Pull Off” test and Cycling Periods, if necessary.
  • Compression joints for copper connections as per BS 4579 part 11970 (1988)
We also manufacture the following terminals as per DIN standards:
  • Copper sealing ferrules as per DIN 46228
  • Copper Tubular terminals as per DIN 40500
  • Copper Tubular terminals as per DIN 46235
Copper compression lugs - short barrel
Copper Compression Lugs - Short Barrel Copper Compression Lugs - Short Barrel


Copper Compression Lugs - Short Barrel


WIRE SIZE BOLT SIZE TANG WIDTH Dimensions O.D INCH. I.D INCH. Product Code
C D E F T
8 10 0.41 0.2 0.44 0.5 1.13 0.09 0.28 0.17 HCRA 8
6 10 0.41 0.2 0.81 0.5 1.5 0.09 0.3 0.2 HCRA 6
6 1/4 0.41 0.28 0.81 0.5 1.5 0.09 0.3 0.2 HCRA 6
4 10 0.5 0.2 0.81 0.5 1.5 0.09 0.34 0.25 HCRA 4
4 5/16 0.5 0.33 0.81 0.5 1.5 0.09 0.34 0.25 HCRA 4-516
4 1/4 0.5 0.28 0.81 0.5 1.5 0.09 0.34 0.25 HCRA 4
3 1/4 0.53 0.28 0.81 0.5 1.5 0.09 0.38 0.28 HCRA 3
2 1/4 0.59 0.28 0.88 0.75 1.81 0.11 0.42 0.31 HCRA 2
2 5/16 0.59 0.34 0.88 0.75 1.84 0.11 0.42 0.31 HCRA 2
2 3/8 0.59 0.41 1.09 0.75 2.03 0.11 0.42 0.31 HCRA 2
1 5/16 0.69 0.34 0.88 0.75 1.88 0.11 0.47 0.36 HCRA 1
1 1/4 0.69 0.28 0.88 0.75 1.88 0.11 0.47 0.36 HCRA 1-14
1 3/8 0.69 0.41 0.88 0.75 1.88 0.11 0.47 0.36 HCRA 1-38
1/0 5/16 0.75 0.34 0.88 0.75 1.88 0.13 0.52 0.39 HCRA 0
1/0 1/4 0.75 0.28 0.88 0.75 1.88 0.13 0.52 0.39 HCRA 0-14
1/0 3/8 0.75 0.41 0.88 0.75 1.88 0.13 0.52 0.39 HCRA 0
2/0 3/8 0.81 0.41 0.94 0.88 2.09 0.13 0.56 0.44 HCRA 2/0
2/0 1/4 0.81 0.28 0.94 0.88 2.09 0.13 0.56 0.44 HCRA 2/0-14
2/0 5/16 0.81 0.34 1.22 0.88 2.09 0.13 0.56 0.44 HCRA 2/0
3/0 3/8 0.91 0.41 1 1 2.31 0.13 0.61 0.48 HCRA 3/0
3/0 1/4 0.91 0.28 1 1 2.31 0.13 0.61 0.48 HCRA 3/0-14
3/0 1/2 0.91 0.53 1 1 2.31 0.13 0.61 0.48 HCRA 3/0
3/0 5/16 0.91 0.34 1.31 0.69 2.31 0.13 0.61 0.48 HCRA 3/0
4/0 3/8 1 13.32 1 1 2.34 0.14 0.69 0.55 HCRA 4/0
4/0 1/4 1 9.32 1 1 2.34 0.14 0.69 0.55 HCRA 4/0-14
4/0 1/2 1 0.53 1 1 2.34 0.14 0.69 0.55 HCRA 4/0
4/0 5/16 0.91 0.34 1.34 0.69 2.31 0.13 0.69 0.55 HCRA 4/0
250MCM 1/2 1.09 0.53 1.06 1.13 2.63 0.16 0.75 0.56 HCRA 250
250MCM 3/8 1.09 0.53 1.06 1.13 2.63 0.16 0.75 0.56 HCRA 250-38
300MCM 1/2 1.19 0.53 1.06 1.13 2.63 0.16 0.81 0.66 HCRA 300
300MCM 3/8 1.19 0.53 1.06 1.13 2.63 0.16 0.81 0.66 HCRA 300-38
300MCM 5/16 1.19 0.53 1.06 1.13 2.63 0.16 0.81 0.66 HCRA 300-516
300MCM 5/8 1.19 0.53 1.06 1.13 2.63 0.16 0.81 0.66 HCRA 300-58
350MCM 1/2 1.28 0.53 1.13 1.13 2.69 0.19 0.88 0.69 HCRA 350
400MCM 5/8 1.38 0.69 1.88 1.5 3.31 0.19 0.94 0.75 HCRA 400
400MCM 1/2 1.38 0.69 1.19 1.5 3.31 0.19 0.94 0.75 HCRA 400-12
500MCM 5/8 1.53 0.69 1.38 1.5 3.5 0.25 1.06 0.83 HCRA 500
500MCM 1/2 1.53 0.56 1.38 1.5 3.5 0.25 1.06 0.83 HCRA 500-12
600MCM 5/8 1.69 0.69 1.5 1.5 3.63 0.25 1.19 0.92 HCRA 600
600MCM 1/2 1.69 0.69 1.5 1.5 3.63 0.25 1.19 0.92 HCRA 600-12
*700MCM 5/8 1.78 0.66 1.38 1.75 3.97 0.27 1.25 0.98 *HCRA 700
*750MCM 5/8 1.91 0.66 1.63 1.94 4.34 0.27 1.31 1.03 *HCRA 750
*1000MCM 5/8 2.19 0.66 1.88 2.13 4.88 0.33 1.5 1.17 *HCRA 1000



OUR CLIENTS

new

Member IndiaMART.com © Brass Copper & Alloy India Limited. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited